How To Fix Bent Garage Door Panel – Step By Step Guide

Bent on your garage door– a typical scenario, whether by accident or constant use. Sometimes parts can be broken or worn out, causing them to bend and not work correctly. But how to fix bent garage door? 

For this, you will need to understand how the parts of a garage door work and whether you can fix it yourself or need professional help. It becomes more important when you have an automatic garage door. It can be difficult to crack how to fix the bent yourself then. 

Here we\’ll discuss the leading cause of bending garage doors and if you can fix bent garage door. 

Is Fixing A Bent Garage Door Simple?

The door panel may deform during door operation, causing the door to lag. It\’s a common problem that plenty of people ignore.

However, a close inspection of the garage door can reveal a little bend that is the cause of the problem. Your garage door\’s curve could damage the rail and track.

Fortunately, you can fix bent garage door. But it needs to be done correctly. You can learn how to fix bent garage door panel on your own, but even minor damage might cause serious consequences. Therefore, it is advised that you have a professional for your bent garage door repair.

Dents and bending will happen in your location if bad weather prevails. Dents can also appear when the door is struck by tree branches or other storm debris. For the most part, you won\’t be able to prevent dents. Therefore, it\’s good to know how to fix them. But if you\’re hesitant, you may always get help from a specialist.

How to Fix Bent Garage Door Panel?

Inspect Damage

As previously said, it is advisable to let a professional handle the fix bent garage door panel. If you insist on repairing it yourself, though, here\’s a fast-fix bent garage door panel. 

Hammering the bents

Slight damage in the panel may easily be fixed with a hammer. A hammer can be used to correct a dent. A wooden mallet may be used to straighten out a little curvature in the garage door panel.

Put the mallet in front of the area that has to be straightened. Afterwards, use the hammer to gently tap the damaged area.

Cover up the bents

You should hide the dent from the outside if your garage door is insulated or if the dent is in an area that can\’t be reached. Follow the manufacturer\’s recommendations when using a simple, and then paint the door to match.

After fix bent garage door, the door will be freshly painted and ought to look much better.

Install new panel

There is a procedure to follow, but you can replace a door panel in certain cases. Several DIY tutorials are available on how to repair a garage door panel, but without the right equipment and knowledge, you might end up doing more harm than good.

We always advise hiring a specialist to complete any activities you need to be more competent in or at ease doing.

Use Suction Cups

Suction cups can also be used to fix bent garage door panel. One of the most recent techniques being used by specialists is this one. Suction tools could be effective if your door is entirely constructed of metal.

When the suction tools are applied to the dented portion of the panel, the pressure straightens the bent region. But keep in mind that this only works for very small dents.

The fact that this strategy may do the work in a short amount of time is a benefit.

Why does a garage door bend?

Due to normal wear and use, a garage door may bend. But this occurs because the door\’s mechanism needs to be appropriately maintained. If your garage door is over a year or two old, you should inspect it to determine any rust or component issues.

The buildup of grit, sand, or other debris in the mechanism is another typical factor in bent garage doors. If there is material trapped in your garage obstruction mechanism, it will produce extra stress and might result in bending issues.

Remember to pay attention to the wires of the obstruction mechanism. If one of them is injured, it will eventually result in bending. This is so that the wires can withstand the weight of the garage.

There will be an imbalance in weight on both sides if one collapses. You may avoid any bending or other issues with the machinery in your garage by giving it a thorough inspection each year.

The impact of moving cars on the door panel is another factor that results in bending.

Stop using it and inspect the mechanism if you have recently struck your garage door with your car. If you find your garage door is damaged, do the necessary repairs yourself or hire a professional.

How Much Does a bent garage door repair Cost?

The repair cost of your bent garage door depends on the extent of the damage. Small bents or cracks can be easily repaired. But bents caused by a car hit or major accident, it may cost about $100 to $200 to repair a panel. 

You should consider a complete replacement if the damage is serious. The cost to replace the panels might range from $700 to $1,400. All of it is based on the kind of door you have.

Conclusion 

A garage door can be easily damaged for any reason. A small dent can cause your door to stop working or moving smoothly. So if your garage door is bent, make sure not to use the door and fix or replace the parts that need to be done. 

It is always preferable to contact a professional. By doing so, you do your best work and prevent injury to yourself.

Our garage door repair specialists at Precise are on call for emergencies. Contact our experts at any time, day or night, for quick assistance. We will diagnose the bent to determine what is necessary to get your door functional again. 

FAQs